Call 08048603177 76% Response Rate

Send Email

Maedler Germany

Maedler is a German based company which is founded in 1882. It has comprehensive range of power transmission products such as Roller chains & sprockets, Rack & pinion, Spline shafts & Hubs, Locking assemblies/ Powerlocks, Couplings, Belt & pulleys, Gearbox etc. Maedler is well known for its extensive product range with ready stock at Germany.
Madler Round Gear Rack
  • Madler Round Gear Rack
  • Madler Round Gear Rack
  • Madler Round Gear Rack

Madler Round Gear Rack

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Piece
MaterialPlastic, Steel, Etc. As per requirement
ShapeRound
Usage/ApplicationIndustrial
BrandMadler
ColorAs per material
LengthAs per requirement
I Deal InNew Only
We are the distributors for the Madler Round Gear Racks and lots of other quality products from a different country to India and others.

For more details about rack and other please contact us.

Additional Information:

  • Delivery Time: Ex-Stock
Get Best QuoteRequest A Callback
Madler Splined Shafts With Hub
  • Madler Splined Shafts With Hub
  • Madler Splined Shafts With Hub
  • Madler Splined Shafts With Hub
  • Madler Splined Shafts With Hub

Madler Splined Shafts With Hub

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Piece
MaterialAs per requirenment
DiameterAs per requirenment
BrandMadler
Usage/ApplicationIndustrial
ShapeAs per requirenment
DesignAs per requirenment
Splined Shafts With Hub

Complete range of spline shaft and hub from Madler Germany. Available in all materials and sizes.

We also have a large range of mechanical components.


Additional Information:

  • Delivery Time: Ex-Stock
Get Best QuoteRequest A Callback
Gear Rack Made Of Steel Module 3 Tooth Width 25mm Height 30mm Length 1000mm
  • Gear Rack Made Of Steel Module 3 Tooth Width 25mm Height 30mm Length 1000mm
  • Gear Rack Made Of Steel Module 3 Tooth Width 25mm Height 30mm Length 1000mm
  • Gear Rack Made Of Steel Module 3 Tooth Width 25mm Height 30mm Length 1000mm

Gear Rack Made Of Steel Module 3 Tooth Width 25mm Height 30mm Length 1000mm

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Unit
MaterialC45
ShapeSpur
Usage/ApplicationIndustrial
Length1000mm
Face Width25 mm
HardnessNo
Pressure Angle20 Degree

Specially treated bright steel C45KG.
Milled teeth. Precisely Straightened.
Cross-section tolerance h11 = -1/10 to -2/10 depending on size.

Straight teeth. Pressure angle 20°.
Tooth quality 8d25 modelled on DIN 3962, 3967, 3968.

The teeth on the gear racks are manufactured using an overhead milling cutter.
This leads to negative tolerances for dimension a and h0:
up to Module 2: -0,2 mm.
Module 2,5 to 3: -0,3 mm.
Module 5 to 8: -0,4 mm



Additional Information:

  • Delivery Time: Ex-stock
Get Best QuoteRequest A Callback
Maedler Rack And Spur Gears Pinion
  • Maedler Rack And Spur Gears Pinion
  • Maedler Rack And Spur Gears Pinion
  • Maedler Rack And Spur Gears Pinion
  • Maedler Rack And Spur Gears Pinion
  • Maedler Rack And Spur Gears Pinion

Maedler Rack And Spur Gears Pinion

Get Latest Price

Product Brochure

Product Details:
MaterialSteel, 16MnCr5, C4
Surface FinishingPolished
BrandMaedler
Usage/ApplicationSPM, CNC, Moulding Machines etc.
DesignStraight Tooth, Helical Tooth
Pitch5 mm and Pitch 10 mm
Made InGermany
Other Details:
  • Spur Gears Acetal Resin, die-cast, Module 0.5 to 3
  • Spur Gears Polyketone die-cast, Module 0.5 to 3
  •  Spur Gears POM white / nature, Milled Teeth, Module 0.5 to 3
  • Spur Gears POM black, Milled Teeth, Module 1 to 3
  •  Spur Gears, Plastic PA 12 G with Steel Core, Module 1.5 to 4
  • Spur Gears, Plastic PA 12 G with Stainless Steel Core, Module 1.5 to 4
  • Spur Gears, Brass, Module 0.3 to 1
  • Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 8
  • Spur Gears, Steel C45, Hardened Teeth, Module 1-6
  • Spur Gears, Stainless Steel 1.4305, Milled Teeth, Module 1 to 4


Additional Information:

  • Delivery Time: Ex-stock or 3 to 4 Weeks as per
Get Best QuoteRequest A Callback
Maedler Square Gear Racks Straight Tooth System
  • Maedler Square Gear Racks Straight Tooth System
  • Maedler Square Gear Racks Straight Tooth System
  • Maedler Square Gear Racks Straight Tooth System
  • Maedler Square Gear Racks Straight Tooth System
  • Maedler Square Gear Racks Straight Tooth System
  • Maedler Square Gear Racks Straight Tooth System
  • Maedler Square Gear Racks Straight Tooth System
  • Maedler Square Gear Racks Straight Tooth System

Maedler Square Gear Racks Straight Tooth System

Get Latest Price

Product Brochure

Product Details:
ShapeSquare
Usage/ApplicationIndustrial
BrandMaedler
Teeth FormStraight Toothed System
Length250mm to 2000mm
Module0.5 to 8
Available MaterialSteel, Stainless Steel, Steel C45kg, Steel C45, Polyacetal Die-cast, Polyketone, Brass, Pom
Metrical Pitch5 mm and 10 mm
Other Details:
  • Gear Racks, Polyacetal Die-Cast, Module 0.5 to 3
  • Gear Racks, Polyketone, Module 0.5 to 3
  • Gear Racks, POM white, Milled Teeth, Module 0.5 to 3
  • Gear Racks, POM, black, Milled Teeth, Module 0.5 to 3
  • Gear Racks, Brass, Module 0.3 to 1
  • Gear Racks, Steel C45KG, Quality 8, Module 0.5 to 8
  • Gear Racks, Steel C45, Quality 9, Module 1 to 6
  • Gear Racks, Steel C45KG, Hardened Teeth, Module 2 to 6
  • Precision Gear Racks, Steel, Hardened and Ground, Module 1 to 3
  • Gear Racks, Stainless Steel, Module 1 to 4


Additional Information:

  • Delivery Time: 3-4 weeks
Get Best QuoteRequest A Callback
Maedler Square Gear Racks, Helical Tooth System
  • Maedler Square Gear Racks, Helical Tooth System
  • Maedler Square Gear Racks, Helical Tooth System
  • Maedler Square Gear Racks, Helical Tooth System
  • Maedler Square Gear Racks, Helical Tooth System
  • Maedler Square Gear Racks, Helical Tooth System

Maedler Square Gear Racks, Helical Tooth System

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Unit
MaterialBrass and Steel
ShapeSquare
Usage/ApplicationIndustrial
BrandMaedler
Teeth FormHelical Tooth System
Pressure Angle20 Degree
Surface FinishingPolished
Other Details:
  • Square Gear Racks, Brass, Helical Left-Handed, Module 0.3 and 0.5
  • Square Gear Racks, Steel, Helical Left-Handed, Module 1
  • Gear Racks, Steel, Tempered, Helical Tooth, Right-Handed, Module 2 to 5
  • Precision Gear Racks, Steel, Hardened and Ground, Helical Tooth, Right-Handed, Module 2 to 5
  • Counterpart for Mounting, for Racks with Helical Tooth System


    Additional Information:

    • Delivery Time: 3-4 weeks
    Get Best QuoteRequest A Callback
    Maedler Spur Gears, Helical Tooth System
    • Maedler Spur Gears, Helical Tooth System
    • Maedler Spur Gears, Helical Tooth System
    • Maedler Spur Gears, Helical Tooth System
    • Maedler Spur Gears, Helical Tooth System
    • Maedler Spur Gears, Helical Tooth System

    Maedler Spur Gears, Helical Tooth System

    Get Latest Price

    Product Brochure

    Product Details:
    Minimum Order Quantity1 Unit
    Usage/ApplicationIndustrial
    Gear TypeHelical Toothed Spur Gear
    MaterialBrass and Steel
    Module0.3 to 5
    BrandMaedler
    DesignHelical Tooth System
    Face Width5mm to 50mm
    OrientationLeft and Right Handed Orientation
    No. Of Teeth10 to 50
    Made InGermany
    Other Details:
    • Spur Gears, Brass, Helical Tooth Right Hand, Module 0.3 and 0.5
    • Spur Gears, Steel, Helical Tooth Right and left hand, Module 1
    • Precision Spur Gears, Helical Tooth Left Hand, Module 2 - 5


      Additional Information:

      • Delivery Time: 3-4 weeks
      Get Best QuoteRequest A Callback
      Madler Gear Rack
      • Madler Gear Rack
      • Madler Gear Rack
      • Madler Gear Rack
      • Madler Gear Rack

      Madler Gear Rack

      Get Latest Price

      Product Brochure

      Product Details:
      MaterialPlastic, Steel, Etc. As per requirement
      ShapeRound
      Usage/ApplicationIndustrial
      BrandMadler
      Teeth Formas per requirement
      Coloras per material
      Thicknessas per requirement
      Lengthas per requirement
      Supply AbilityHigh
      DiameterAs per requirement
      I Deal InNew Only
      We are the largest stockist and distributor for Maedler products like gear racks in India Gear rack is a simple mechanism to convert rotary motion into linear motion or vice-versa.





      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      Maedler Round Gear Racks Straight Tooth System Maedler Germany
      • Maedler Round Gear Racks Straight Tooth System Maedler Germany
      • Maedler Round Gear Racks Straight Tooth System Maedler Germany
      • Maedler Round Gear Racks Straight Tooth System Maedler Germany

      Maedler Round Gear Racks Straight Tooth System Maedler Germany

      Get Latest Price

      Product Brochure

      Product Details:
      MaterialStainless Steel
      Usage/ApplicationIndustrial
      ShapeRound
      BrandMaedler
      Teeth FormStraight Tooth System
      Made InGermany
      Round Gear Racks with Metric Pitch5mm and 10mm



      Additional Information:

      • Delivery Time: 2 to 6 weeks
      Get Best QuoteRequest A Callback
      Maedler Germany Splined shaft and Hub
      • Maedler Germany Splined shaft and Hub
      • Maedler Germany Splined shaft and Hub
      • Maedler Germany Splined shaft and Hub
      • Maedler Germany Splined shaft and Hub

      Maedler Germany Splined shaft and Hub

      Get Latest Price

      Product Brochure

      Product Details:
      Diameter20 to 100 mm
      BrandMaedler
      Usage/ApplicationSPM, Moulding Machines, etc.
      Hub MaterialC45, Red Brass, SS 1.4301
      Made inGermany
      Splined Shaft MaterialCold Drawn Steel, C45, SS 1.4301, Steel 42crmo4
      Max LengthUpto 6 m



      Additional Information:

      • Delivery Time: Ex stock or 3-4 weeks
      Get Best QuoteRequest A Callback
      Maedler Ball Transfer Unit
      • Maedler Ball Transfer Unit
      • Maedler Ball Transfer Unit
      • Maedler Ball Transfer Unit
      • Maedler Ball Transfer Unit

      Maedler Ball Transfer Unit

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      MaterialCarbon Steel, SS
      Ball Diameter8mm to 38.1mm
      BrandMaedler
      Load100N to 11000N
      ApplicationsMaterial Handling & Others
      Lead Time2 to 4 Weeks
      Surface FinishPolished
      Made InGermany
      We are the authorized distributors and stockist for Maedler Gmbh (Madler Gmbh) products. Maedler has above 25000 products under their brand.

      Additional Information:

      • Delivery Time: 3 to 4 weeks
      Get Best QuoteRequest A Callback
      Madler Industrial Chain
      • Madler Industrial Chain
      • Madler Industrial Chain
      • Madler Industrial Chain
      • Madler Industrial Chain

      Madler Industrial Chain

      Get Latest Price

      Product Brochure

      Product Details:
      BrandMadler
      PitchAs per requirement (Standard)
      Roller DiaStandard
      Plate Width InnerStandard
      MaterialStandard
      We Deal InNew Only
      Complete series of industrial chain and sprocket from worlds two best brands Madler and Tstubaki at best price. 

      All sizes are available in both brands. 

      Following are some main types of chains
      1. Simplex
      2. Duplex
      3. Triplex
      Get Best QuoteRequest A Callback
      Maedler Roller Chains
      • Maedler Roller Chains
      • Maedler Roller Chains
      • Maedler Roller Chains
      • Maedler Roller Chains

      Maedler Roller Chains

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Piece
      BrandTsubaki / Madler
      PitchAs per requirement (Standard)
      Roller DiaStandard
      Plate Width InnerStandard
      Tensile StrengthStandard
      Transverse PitchStandard
      We Deal InNew Only
      We are distributors and stockists for the Roller chain in India. We have Lots of variants of this in stock. Please contact us for more details.

      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      RS100-1B-13T Tsubaki (Japan) Sprocket
      • RS100-1B-13T Tsubaki (Japan) Sprocket
      • RS100-1B-13T Tsubaki (Japan) Sprocket
      • RS100-1B-13T Tsubaki (Japan) Sprocket

      RS100-1B-13T Tsubaki (Japan) Sprocket

      Get Latest Price

      Product Brochure

      Product Details:
      TypeRS tough tooth sprocket
      Usage/ApplicationIndustrial
      Gear TypeSprocket
      BrandMaedler
      ColorBlack
      Surface TreatmentAs per requirement
      Finishing TypeHigh
      CapacityAs per requirement
      I deal inNew Only
      No. Of Teeth13
      Product TypeSprocket
      Number Of Teeth13
      Packaging TypeGood
      Size/Dimension148 mm
      Surface FinishingHigh
      WeightAs per size
      Hub length:50mm
      Estimated Mass3.1 Kg
      Hub Outer Diameter88mm
      Pitch Circle Diameter132.67mm
      Tsubaki (Japan) Sprocket - RS tough tooth sprocket with number of teeth 13
      Technical Details:1) Number of teeth: 132) Pitch circle dia: 132.67mm3) Outer Diameter: 148 mm4) Hub outer dia: 88mm5) Hub length: 50mm6) Estimated Mass: 3.1 Kg


      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      Locking Assembly COM-L Bore 50Mm Size 50-80
      • Locking Assembly COM-L Bore 50Mm Size 50-80
      • Locking Assembly COM-L Bore 50Mm Size 50-80
      • Locking Assembly COM-L Bore 50Mm Size 50-80

      Locking Assembly COM-L Bore 50Mm Size 50-80

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      BrandMaedler
      Size50-80
      Quantity Per Pack1 unit
      Applicable ForIndustrial
      Product CategoryLocking assembly
      MaterialSteel
      Surface FinishingHigh
      Weight1 kg
      Dimensions90 x 90 x 60 cm
      SKU61551150

      Material: Steel.

      • For fixing a hub (e. g. drive wheel,
      • rotor or similar) on a shaft.
      • For high torques.
      • Self-centering.
      • Slight axial offset possible during mounting.
      • Concentricity: 0. 02 to 0. 04mm.

      Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12. 5µm.



      Additional Information:

      • Delivery Time: ex-stock
      Get Best QuoteRequest A Callback
      Sprocket Krf With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1
      • Sprocket Krf With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1
      • Sprocket Krf With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1
      • Sprocket Krf With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1

      Sprocket Krf With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      MaterialSteel C45, teeth induction hardened (approx. HRC 50).
      Usage/ApplicationIndustrial
      ShapeSprocket
      Surface TreatmentBlank
      Design/PatternSprocket KRF With Hub
      Bore SizeBore H7[mm] - 24
      I deal inNew Only
      No. Of Teeth20
      Product Code10182024
      Product TypeSprocket
      Size3/8"X7/32"
      Number Of Teeth20
      Pitch60.89
      Surface FinishingGood
      Weight0.308 kg
      Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 – surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°.
      General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.
      Other dimensions: See the table.

      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      Sprocket KRG With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1
      • Sprocket KRG With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1
      • Sprocket KRG With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1
      • Sprocket KRG With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1

      Sprocket KRG With Hub 06 B-1 3/8""x7/32"" 20 Teeth Material Steel Bore 24h7 Keyway Din 6885/1

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      MaterialSteel C45, teeth induction hardened (approx. HRC 50)
      Usage/ApplicationIndustrial Application
      Bore Size24H7
      Design/PatternSprocket
      HardenedYes
      Number Of Teeth20
      Surface FinishingBlank
      Weight0.308 kg
      Material: Steel C45, teeth induction hardened (approx. HRC 50). 
      Ready-to-install, for various shaft diameters. Custom bore H7 – surface parameter Ra
      1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one
      offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.

      Additional Information:

      • Delivery Time: Ex - stock
      Get Best QuoteRequest A Callback
      Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 8 Teeth Material Steel Teeth Induction Hardened
      • Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 8 Teeth Material Steel Teeth Induction Hardened
      • Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 8 Teeth Material Steel Teeth Induction Hardened
      • Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 8 Teeth Material Steel Teeth Induction Hardened

      Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 8 Teeth Material Steel Teeth Induction Hardened

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      MaterialSteel C45, teeth induction hardened (HRC 50)
      Chain Size28 x 28 x 22 cm
      Usage/ApplicationIndustry Application
      Bore Size8mm
      HardenedYes
      Number Of Teeth8
      Pitch3/8x7/32"
      Weight0.034kg
      Steel C45, teeth induction hardened (≈ HRC 50).
      Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.

      Additional Information:

      • Delivery Time: Ex-stock
      Get Best QuoteRequest A Callback
      Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 24 Teeth Material Steel Teeth Induction Hardened
      • Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 24 Teeth Material Steel Teeth Induction Hardened
      • Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 24 Teeth Material Steel Teeth Induction Hardened
      • Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 24 Teeth Material Steel Teeth Induction Hardened

      Sprocket KRG With Hub 06 B-1 3/8 X 7/32"" 24 Teeth Material Steel Teeth Induction Hardened

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      MaterialSteel C45, teeth induction hardened (HRC 50)
      Chain Size77 x 77 x 28 cm
      Usage/ApplicationIndustrial Application
      Bore Size12mm
      Sprocket HubOne-sided
      HardenedYes
      Number Of Teeth24
      Pitch3/8x7/32"
      Weight0.542
      Steel C45, teeth induction hardened (≈ HRC 50).
      Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.

      Additional Information:

      • Delivery Time: Ex-stock
      Get Best QuoteRequest A Callback
      Sprocket KRG With Hub 08 B-1 1/2x5/16"" 19 Teeth
      • Sprocket KRG With Hub 08 B-1 1/2x5/16"" 19 Teeth
      • Sprocket KRG With Hub 08 B-1 1/2x5/16"" 19 Teeth
      • Sprocket KRG With Hub 08 B-1 1/2x5/16"" 19 Teeth

      Sprocket KRG With Hub 08 B-1 1/2x5/16"" 19 Teeth

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      MaterialC45
      Chain Size3.19 x 3.19 x 1.1 inches
      Usage/ApplicationIndustrial Application
      HardenedYes
      Number Of Teeth19
      Pitch1/2x5/16"
      Weight0.226 kg
      Steel C45, teeth induction hardened. Pre-bored. General
      dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. 

      Additional Information:

      • Delivery Time: Ex-stock
      Get Best QuoteRequest A Callback
      Roller Chain 06 B-1 Pitch 3/8x7/32" SKU: 10100000
      • Roller Chain 06 B-1 Pitch 3/8x7/32" SKU: 10100000
      • Roller Chain 06 B-1 Pitch 3/8x7/32" SKU: 10100000
      • Roller Chain 06 B-1 Pitch 3/8x7/32" SKU: 10100000

      Roller Chain 06 B-1 Pitch 3/8x7/32" SKU: 10100000

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Set
      BrandMadler
      SKU10500000
      Pitch p x Inner Width b [mm]12,7 x 7,75
      Inner Width b2 [mm]11,30
      Roller dia d1 [mm]851
      Bolt Dia [mm]445
      b4 [mm]17,0

      According to DIN ISO 606 (ex DIN 8187). 

      Material: Special chain steel.

      High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates).

      Chains with an uneven number of links are supplied with inner links at bothends. Connecting links must be ordered separately.

      Temperature range: -20°C to +120°C.

      Other temperatures are possible if special grease is
      used. * Pitch 4mm: bush chain

      1 Unit = 1 Meter = 39.37 Inches



      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      Locking Assembly COM-B Bore 25mm Size 25-34 SKU: 61562500
      • Locking Assembly COM-B Bore 25mm Size 25-34 SKU: 61562500
      • Locking Assembly COM-B Bore 25mm Size 25-34 SKU: 61562500
      • Locking Assembly COM-B Bore 25mm Size 25-34 SKU: 61562500

      Locking Assembly COM-B Bore 25mm Size 25-34 SKU: 61562500

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      BrandMaedler
      Size25-34
      Quantity Per Pack1
      Applicable ForIndustrial
      MaterialSteel
      Surface FinishingBlank
      Weight0.358 kg
      Length [mm]45
      hub surface pressure [N/mm2]76
      Locking Assembly COM-B Bore 25mm Size 25-34 SKU: 61562500

      Material: Steel. Self-centering clamping bush for small hub
      diametres. For medium torques. Self-Locking.

      Fit: Shaft h8. Hub H8.

      Mounting: Slightly oil the clamping set before mounting, do not
      use molibdenum disulphide or grease. Tighten the screws evenly and
      crosswise in several steps.

      Demounting: Remove all tensioning screws and screw them into the
      (usually unused) forcing thread of the front flange until the flange is
      released.

      Ts – Fastening Torque

      T – Transmittable Torque

      F – Transmittable Axial Force

      P – Surface Pressure onto Hub

      SKU 61562500
      d [mm] 25
      D [mm] 34
      L [mm] 45
      L1 [mm] 25
      L2 [mm] 51
      D1 [mm] 56
      Transmissible Torque T [Nm] 280
      Transmissible Axial Force Fax [kN] 22
      Pw [N/mm²] 101
      Surface Pressure Hub P [N/mm²] 76
      Bolt Size M [DIN 912, 12.9] 4 x M6
      Tightening Torque TA [Nm] 17
      Weight [kg] 0,34


      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      Locking Assembly COM-A Bore 30mm Size 30-55 SKU: 61553000
      • Locking Assembly COM-A Bore 30mm Size 30-55 SKU: 61553000
      • Locking Assembly COM-A Bore 30mm Size 30-55 SKU: 61553000
      • Locking Assembly COM-A Bore 30mm Size 30-55 SKU: 61553000

      Locking Assembly COM-A Bore 30mm Size 30-55 SKU: 61553000

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      BrandMaedler
      Quantity Per Pack1
      Applicable ForIndustrial
      MaterialSteel
      Surface FinishingBlank
      Weight0.261 kg
      SKU61553000
      Dimensions600 x 600 x 300 mm
      Locking Assembly COM-A Bore 30mm Size 30-55 SKU: 61553000

      Material: Steel. Clamping bush for medium high torques; not
      self-centering.

      Fit: Shaft h8. Hub H8.

      Mounting: Slightly oil the clamping set before mounting, do not
      use molibdenum disulphide or grease. Tighten the screws evenly and
      crosswise in several steps.

      Demounting: Due to the large cone angle, the clamping set
      releases on its own after the screws have been fully unfastened.

      There are three larger threads cut into the front ring, which serve to
      remove this ring.

      Ts – Fastening Torque

      T – Transmittable Torque

      F – Transmittable Axial Force

      P – Surface Pressure onto Hub



      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      Locking Assembly COM-B Bore 30mm Size 30-41 SKU: 61563000
      • Locking Assembly COM-B Bore 30mm Size 30-41 SKU: 61563000
      • Locking Assembly COM-B Bore 30mm Size 30-41 SKU: 61563000
      • Locking Assembly COM-B Bore 30mm Size 30-41 SKU: 61563000

      Locking Assembly COM-B Bore 30mm Size 30-41 SKU: 61563000

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      BrandMadler
      Size30-41
      Quantity Per Pack1
      Applicable ForIndustrial
      MaterialSteel
      Surface FinishingBlank
      Weight0.452 kg
      Dimensions650 x 650 x 600 mm
      Locking Assembly COM-B Bore 30mm Size 30-41 SKU: 61563000

      Material: Steel. Self-centering clamping bush for small hub
      diametres. For medium torques. Self-Locking.

      Fit: Shaft h8. Hub H8.

      Mounting: Slightly oil the clamping set before mounting, do not
      use molibdenum disulphide or grease. Tighten the screws evenly and
      crosswise in several steps.

      Demounting: Remove all tensioning screws and screw them into the
      (usually unused) forcing thread of the front flange until the flange is
      released.

      Ts – Fastening Torque

      T – Transmittable Torque

      F – Transmittable Axial Force

      P – Surface Pressure onto Hub

      SKU 61563000
      d [mm] 30
      D [mm] 41
      L [mm] 45
      L1 [mm] 25
      L2 [mm] 51
      D1 [mm] 62
      Transmissible Torque T [Nm] 500
      Transmissible Axial Force Fax [kN] 32
      Pw [N/mm²] 133
      Surface Pressure Hub P [N/mm²] 95
      Bolt Size M [DIN 912, 12.9] 6 x M6
      Tightening Torque TA [Nm] 17
      Weight [kg] 0,43


      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425
      • Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425

      Rubber-Metal MGS Diameter 30mm Height 25mm Thread M8x20 SKU: 68580425

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Unit
      MaterialNatural
      ShapeRound
      Usage/ApplicationIndustrial
      BrandMaedler
      Hardness50-60
      ColorBlack
      Operating Temperatureup to 80 DegreeC.
      D [mm]30
      G [mm]M8
      H [mm]25
      I [mm]20
      SKU68580425

      Material: Metal parts: Steel, zinc-plated. Elastomer: Natural
      rubber, hardness 55° Shore.

      Metal on one side only. Metal bumpers can be used to limit bearing
      surfaces e. g. for elastically mounted power units, and as bump stop to
      limit the spring travel in vehicles. They can also be used for machines
      that cannot be fixed to the floor or are standing on floors with an
      easily damaged surface, e. g. office machines. * Fperm. is the
      permissible static permanent load, which may be overlaid by a dynamic,
      alternating load. With shearing load please take care that no tension
      load in the rubber occurs at all during mounting. To achieve a
      sufficient fatigue strength provide some compressive pre-stressing. The
      stated permissible loads are only approximate, guideline values for the
      static load for "medium" rubber hardness. With particularly high,
      dynamic, alternating loads or high frequencies, the load figures have to
      be reduced accordingly. Temperature resistant up to 80°C.



      Additional Information:

      • Delivery Time: Ex-Stock
      Get Best QuoteRequest A Callback
      Maedler Bevel Gears
      • Maedler Bevel Gears
      • Maedler Bevel Gears
      • Maedler Bevel Gears
      • Maedler Bevel Gears
      • Maedler Bevel Gears

      Maedler Bevel Gears

      Get Latest Price

      Product Brochure

      Product Details:
      Usage/ApplicationIndustrial
      MaterialStainless Steel
      Gear TypeStraight and Helical Toothed Bevel Gear
      Size25x25x25 mm
      Capacity100
      Diameter15 to 50 mm
      No. Of Teeth20
      BrandMaedler
      Made InGermany
      Other Details:
      • Bevel Gears, Polyacetal Resin, Ratio 1:1 - 5:1
      • Bevel Gears, Polyketone Resin, Ratio 1:1 - 5:1
      • Angular Drive with Polyacetal Bevel Gears, Ratio 1:1
      • Angular Drive with polyketone Bevel Gears, Ratio 1:1
      • Bevel gears Made of Zinc Die-Cast, ratio 1:1
      • Bevel Gears Made of Brass, Ratio 1:1 - 4:1
      • Bevel Gears, Steel, Straight Tooth System, ratio 1:1 - 4:1
      • Bevel Gears, Stainless Steel, Straight Tooth System, Ratio 1:1 - 4:1
      • Bevel Gears, Steel, Spiral Tooth System, Ratio 1:1 - 4:1
      Get Best QuoteRequest A Callback
      Maedler Friction Clutches
      • Maedler Friction Clutches
      • Maedler Friction Clutches
      • Maedler Friction Clutches

      Maedler Friction Clutches

      Get Latest Price

      Product Brochure

      Product Details:
      Surface FinishPolished
      Usage/ApplicationIndustrial
      Outer Diameter30mm to 285mm
      Internel Diameter60mm to 60mm
      Made InGermany
      Available MaterialSteel, Zinc-plated And Yellow Passivated, Zinc-phosphate
      ShapeRound
      Maedler Friction Clutches are having different types such as Type BAxial Arrangement, Type C Transversal Flexibility, Sliding Hubs with Torsionally-Flexible Coupling, Multi-Disk Friction Clutches PD, Safety Clutches SI etc

      Aplications:
      • Small light generators           
      • Small machine tools             
      • Centrifugal pumps and generators
      • Flower mills and food grinders                  
      • • Cement mills 


      Additional Information:

      • Delivery Time: 3-4 weeks
      Get Best QuoteRequest A Callback
      Maedler Roller Chains And Connecting Links
      • Maedler Roller Chains And Connecting Links
      • Maedler Roller Chains And Connecting Links
      • Maedler Roller Chains And Connecting Links

      Maedler Roller Chains And Connecting Links

      Get Latest Price

      Product Brochure

      Product Details:
      MaterialSpecial Chain Steel
      ColorBlack
      Usage/ApplicationSPM, Conveyor, Packaging Machines etc.
      BrandMaedler
      Made inGermany
      Pitch4mm to 38.1mm
      No. of Strands1 to 3
      Temperature-10 to 120 Degree C
      We supply industrial chains only  for industrial application , non-automotive type
      Single-Strand or Simplex Roller Chains:-Material: special, high-quality steel, or lubrication-free, with additional nickel plating, or in stainless steel.
      Double-Strand or Duplex Roller Chains:-As standard version made from special, high-quality steel.The transmission power is 1.75 times higher than single-strand.
      Triple-Strand or Triplex Roller Chains:-As standard version made from special, high-quality steel. The transmissionpower of this chain is 2.5 times higher than single-strand.
      Single-Strand Chains with Attachments:-In stock as chain with straight and bent attachments, one-sidedor two-sided attached to the outer link, as one-whole or two-holeversion, with a distance of 2 x p, 4 x p and 6 x p. Other distancesavailable at short notice on request.

      Designs:
      • DIN ISO 606 (ex DIN 8187)Simplex or Single strand roller chainDuplex or Double strand roller chainTriplex or Triple strand roller chainCustomized roller chains are available on request.


      Additional Information:

      • Delivery Time: 3-4 weeks
      Get Best QuoteRequest A Callback
      Maedler Sliding Hub
      • Maedler Sliding Hub
      • Maedler Sliding Hub
      • Maedler Sliding Hub
      • Maedler Sliding Hub

      Maedler Sliding Hub

      Get Latest Price

      Product Brochure

      Product Details:
      BrandMaedler
      Usage/ApplicationIndustrial
      Surface FinishingPolished
      Made InGermany
      Internel Diameter3.7mm to 120mm
      Outer Diameter30mm to 285mm
      Torque0.5Nm to 1360Nm
      Available MaterialSteel, Zinc-plated And Chromatid, Rust-proof Friction Pads
      Speed1200 min-1 to 10000 min-1
      Maedler Sliding Hubs are having different types such as Slip hubs Type A Concentric Design, Sliding Hubs FS Simple Version, Sliding Hubs FA Premium-Quality Version, Sliding Hubs FA Premium-Quality Version with Clamp Hub, Sliding Hubs ROBA® Premium-Quality Version etc

      Applications:
      • Small light generators           
      • Small machine tools             
      • Centrifugal pumps and generators    
      • Flower mills and food grinders           
      • Cement mills


      Additional Information:

      • Delivery Time: 3-4 weeks
      Get Best QuoteRequest A Callback
      Maedler Shrink Disc
      • Maedler Shrink Disc
      • Maedler Shrink Disc
      • Maedler Shrink Disc

      Maedler Shrink Disc

      Get Latest Price

      Product Brochure

      Product Details:
      Material42CrMo4 Quenched, Steel, Stainless Steel 1.4057
      Inner dia10mm to 75mm
      Made InGermany
      BrandMaedler
      ShapeRound
      ApplicationsSPM, Conveyor, Packaging Machines etc.
      Torque22Nm to 6000Nm
      Other Details:
      • For medium torques.
      • No axial shaft-hub movement.
      • Quick mounting & demounting.


      Additional Information:

      • Delivery Time: 3-4 weeks
      Get Best QuoteRequest A Callback
      Maedler Worm Gears Made Of Bronze And Cast Iron , Double-Thread, Right Hand, Module 0.5 To 2 And 3-4
      • Maedler Worm Gears Made Of Bronze And Cast Iron , Double-Thread, Right Hand, Module 0.5 To 2 And 3-4
      • Maedler Worm Gears Made Of Bronze And Cast Iron , Double-Thread, Right Hand, Module 0.5 To 2 And 3-4
      • Maedler Worm Gears Made Of Bronze And Cast Iron , Double-Thread, Right Hand, Module 0.5 To 2 And 3-4
      • Maedler Worm Gears Made Of Bronze And Cast Iron , Double-Thread, Right Hand, Module 0.5 To 2 And 3-4

      Maedler Worm Gears Made Of Bronze And Cast Iron , Double-Thread, Right Hand, Module 0.5 To 2 And 3-4

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Piece
      MaterialCaste Iron and Bronze
      Gear TypeWorm Gears Double-Thread, Right Hand
      Usage/ApplicationIndustrial
      BrandMaedler
      Pressure Angle20 Degree C
      StandardDIN
      EfficiencyApprox. 0.66
      tooth typemilled hollow tooth with double sided hub
      Module0.5 to 2 and 3-4
      Thread typeDouble Thread
      Module 0.5, 0.75, 1.0, 1.5, 2.0 made from bronze: 
      • G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.

      Module 3-4 made from Cast Iron: 
      • GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.


      Additional Information:

      • Delivery Time: 3-4 weeks
      Get Best QuoteRequest A Callback
      Maedler Standard Hollow Worms
      • Maedler Standard Hollow Worms
      • Maedler Standard Hollow Worms
      • Maedler Standard Hollow Worms
      • Maedler Standard Hollow Worms

      Maedler Standard Hollow Worms

      Get Latest Price

      Product Brochure

      Product Details:
      MaterialSteel
      Usage/ApplicationIndustrial
      FinishPolished
      BrandMaedler
      Pressure Angle20 Degree C
      Weight0.004 kg
      Module0.5
      Made InGermany
      Dimensions16 x 8 x 8 cm
      Module 0.5 to 2.0:
      • Steel 11SMnPb30, milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized.

      Module 3 to 5:
      • Steel C45, whirled. Single-thread worms to be paired with single-thread worm gears of the same module. So, various ratios at various axle distances can be realized.


      Additional Information:

      • Delivery Time: 3-4 weeks
      Get Best QuoteRequest A Callback
      Maedler Locking Assemblies Or Powerlocks
      • Maedler Locking Assemblies Or Powerlocks
      • Maedler Locking Assemblies Or Powerlocks
      • Maedler Locking Assemblies Or Powerlocks
      • Maedler Locking Assemblies Or Powerlocks

      Maedler Locking Assemblies Or Powerlocks

      Get Latest Price

      Product Brochure

      Product Details:
      Internal Diameter6mm to 120mm
      Torque Range2Nm to 38400Nm
      BrandMaedler
      MaterialSteel, Steel QPQ & Stainless Steel
      Made InGermany
      Usage/ApplicationIndustrial
      Maedler Locking asemblies or powerlocks are available from Most of the powerlocks are self centering.

      Types of Powerlocks:
      • BAR: Inner dia 5mm-100mm
      • BAR QPQ: Inner dia 5mm-50mm
      • BAR (Stainless): Inner dia 6mm-40mm
      • COM-A: Inner dia 14mm-100mm
      • COM-A (Stainless): Inner dia 20mm-50mm
      • COM-AS : Inner dia 19mm-100mm
      • COM-B : Inner dia 6mm-100mm
      • COM-B (Stainless): Inner dia 10mm-50mm
      • COM-C: Inner dia 19mm-100mm
      • COM-CB1: Inner dia 18mm-100mm
      • COM-CB2: Inner dia 18mm-100mm
      • COM-CB3: Inner dia 14mm-100mm
      • COM-D: Inner dia 19mm-100mm
      • COM-L: Inner dia 25mm-100mm
      • COM-LL: Inner dia 25mm-100mm
      • COM-LLH: Inner dia 42mm-120mm
      • COM-R: Inner dia 6mm-120mm
      • SIG (Stainless): Inner dia 4mm-40mm
      • SSG: Inner dia 14mm-60mm
      • TT 5-16: Inner dia 5mm-16mm
      • TT 17-35: Inner dia 17mm-35mm
      • ST-K: Inner dia 15mm-100mm

      Applications:
      • SPM, Conveyor, Packaging machines etc


      Additional Information:

      • Delivery Time: Ex stock or 3-4 weeks
      Get Best QuoteRequest A Callback
      Maedler Standard Worm Wheels, Single-Thread, Right Hand module
      • Maedler Standard Worm Wheels, Single-Thread, Right Hand module
      • Maedler Standard Worm Wheels, Single-Thread, Right Hand module
      • Maedler Standard Worm Wheels, Single-Thread, Right Hand module
      • Maedler Standard Worm Wheels, Single-Thread, Right Hand module

      Maedler Standard Worm Wheels, Single-Thread, Right Hand module

      Get Latest Price

      Product Brochure

      Product Details:
      Minimum Order Quantity1 Piece
      MaterialGG25
      Gearing Arrangement TypeParallel
      Gear TypeStandard Worm Wheels, Single-Thread, Right Hand Module
      Usage/ApplicationIndustrial
      FinishPolished
      BrandMaedler
      Pressure Angle20 Degree
      Made InGermany
      tooth typeMilled-hollow Teeth With Double Sided Hub
      Other Details:
      • Worm Gears Made of Bronze, Single-Thread, Right Hand, Module 0.5, 0.75, 1.0, 1.5, 2.0.
      • Worm Gears Made of Cast Iron, Single-Thread, Right Hand, Module 3, 4, 5


        Additional Information:

        • Delivery Time: 3-4 weeks
        Get Best QuoteRequest A Callback
        Maedler Industrial Sprockets
        • Maedler Industrial Sprockets
        • Maedler Industrial Sprockets
        • Maedler Industrial Sprockets

        Maedler Industrial Sprockets

        Get Latest Price

        Product Brochure

        Product Details:
        Minimum Order Quantity1 Unit
        Gear TypeSprocket
        BrandMaedler
        Usage/ApplicationIndustrial
        No. Of Teeth8 to 114
        Pitch4mm to 38.1mm
        StandardDIN
        Available MaterialSteel C45, Plastic Polyacetal, Stainless Steel 1.4305, Low Carbon Steel
        Made InGermany
        No. of Strands1 to 3
        We supply industrial chains only  for industrial application , non-automotive type
        Sprockets for Single strand roller chain

        Designs:
        • Sprocket for Single strand roller chain:Comp. stand. 4 mm, DIN ISO 03, DIN ISO 04, DIN ISO 05B-1, DIN ISO 06B-1, DIN ISO 081, DIN ISO 083, DIN ISO 08B-1, DIN ISO 10B-1, DIN ISO 12B-1, DIN ISO 16B-1, DIN ISO 20B-1, DIN ISO 24B-1.
        • Sprocket for Double strand roller chain:DIN ISO 05B-2, DIN ISO 06B-2, DIN ISO 08B-2, DIN ISO 10B-2, DIN ISO 12B-2, DIN ISO 16B-2, DIN ISO 20B-2, DIN ISO 24B-2.
        • Sprocket for Triple strand roller chain:DIN ISO 06B-3, DIN ISO 08B-3, DIN ISO 10B-3, DIN ISO 12B-3, DIN ISO 16B-3, DIN ISO 20B-3, DIN ISO 24B-3


        Additional Information:

        • Delivery Time: 3-4 weeks
        Get Best QuoteRequest A Callback
        Maedler Internal Gear Module 0.5 to 2
        • Maedler Internal Gear Module 0.5 to 2
        • Maedler Internal Gear Module 0.5 to 2
        • Maedler Internal Gear Module 0.5 to 2
        • Maedler Internal Gear Module 0.5 to 2
        • Maedler Internal Gear Module 0.5 to 2
        • Maedler Internal Gear Module 0.5 to 2

        Maedler Internal Gear Module 0.5 to 2

        Get Latest Price

        Product Brochure

        Product Details:
        MaterialBrass and Steel
        ShapeRound
        Usage/ApplicationIndustrial
        Made InGermany
        Surface FinishPolished
        Other Details:
        • Internal Gears, Brass, Module 1 , 0.5 , 0.7.
        • Internal Gears, Steel C45, Module 1 , 1.5, 2.0.


        Additional Information:

        • Delivery Time: 3-4 weeks
        Get Best QuoteRequest A Callback
        Maedler Standard Hollow Worms, Steel, Double-Thread, Right Hand, Module 0.5 to 2.0 and 3-4
        • Maedler Standard Hollow Worms, Steel, Double-Thread, Right Hand, Module 0.5 to 2.0 and 3-4
        • Maedler Standard Hollow Worms, Steel, Double-Thread, Right Hand, Module 0.5 to 2.0 and 3-4
        • Maedler Standard Hollow Worms, Steel, Double-Thread, Right Hand, Module 0.5 to 2.0 and 3-4

        Maedler Standard Hollow Worms, Steel, Double-Thread, Right Hand, Module 0.5 to 2.0 and 3-4

        Get Latest Price

        Product Brochure

        Product Details:
        Minimum Order Quantity1 Piece
        MaterialSteel
        Gear TypeHollow Worms
        Usage/ApplicationIndustrial
        FinishPolished
        ShapeRound
        BrandMaedler
        Toothed Portion ShapeMilled
        Pressure Angle20 Degree
        Weight0.004 kg
        Module 0.5 to 2.0:
        • Steel 11SMnPb30, milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized.

        Module 3 and 4:
        • Steel C45, whirled. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.


        Additional Information:

        • Delivery Time: Ex-Stock
        Get Best QuoteRequest A Callback
        Industrial Steel Sprocket
        • Industrial Steel Sprocket
        • Industrial Steel Sprocket
        • Industrial Steel Sprocket
        • Industrial Steel Sprocket
        • Industrial Steel Sprocket

        Industrial Steel Sprocket

        Get Latest Price

        Product Brochure

        Product Details:
        TypeIndustrial
        MaterialSteel or As per requirement
        Chain SizeAs per requirement
        Usage/ApplicationIndustrial
        BrandMadler
        I deal inNew Only
        We are Mutidimensions largest stockist and distributor for the industrial products like Maedler we only deal in quality products.

        This product is from Maedler / Madler from Germany.  

        Additional Information:

        • Delivery Time: Ex-Stock
        Get Best QuoteRequest A Callback
        Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud
        • Rubber-Metal Bump Stop MGS with Threaded Stud

        Rubber-Metal Bump Stop MGS with Threaded Stud

        Get Latest Price

        Product Brochure

        Product Details:
        Minimum Order Quantity1 Unit
        ColorBlack
        No. Of Bolts1
        Bearing CapacityHigh
        DiameterAs per requirement
        We are athorised the destributors for maedler we have Rubber-Metal Bump Stop MGS with Threaded Stud in stock

        Additional Information:

        • Delivery Time: Ex-Stock
        Get Best QuoteRequest A Callback
        Madler Products
        • Madler Products
        • Madler Products
        • Madler Products
        • Madler Products
        • Madler Products
        • Madler Products

        Madler Products

        Get Latest Price

        Product Brochure

        Product Details:
        MaterialMS, SS
        ShapeRound
        Usage/ApplicationIndustrial
        BrandMadler
        Hardness80 HRC
        Country of OriginMade in India
        We are the leading distributors for the brand maedler Germany in which we are able to supply all the products directly in India.
        Some of the important products are as follows.

        1. Chain and sprocket 
        2. Gears
        3. Powerlocks
        4. Rack and Pinion
        5. Compiling 
        6. Timing belts and pully
        7. Buffers and precision levelers
        8. Spline shaft and hub
        9. Shaft Collar 
        10. Locknut and lock washer 

        For more detai please contact us.


        Additional Information:

        • Delivery Time: Ex-Stock
        Get Best QuoteRequest A Callback

        View More

        EXPLORE MORE CATEGORIES

        Contact Us
         
        Thank youYour Enquiry has been sent successfully.
        © Multidimensions. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.